Gemfan is the propeller a large share of US FPV and Group 2 airframes were designed around, and it is made in China. This page lists every multirotor model Gemfan currently sells from 3-inch to 13-inch, with the size read from Gemfan's own product page, and says plainly which Anvil part is built to drop in for it, which Anvil part only matches the nominal size, and which have no published equivalent yet.
Why the origin matters, in plain language: are Gemfan propellers NDAA-compliant?
An Anvil part referenced to that model on the manufacturer's published diameter, pitch, blade count and hub. Swap the supplier, keep the tune.
An Anvil part with the same diameter, pitch, blade count and configuration, not referenced to the model. Fitment, including the hub, needs confirming.
No published equivalent yet. The link carries the part number into the contact form; sizes outside the line are handled as custom programs.
| Gemfan model | Size (D × P × Blades) | Configuration | Anvil equivalent |
|---|---|---|---|
| 4052 Flash | 4×5.2×3 | Fixed · PC | Request this size |
| 6042 Flash (3-blade) | 6×4.2×3 | Fixed · PC | Request this size |
| 6042 Flash (2-blade) Gemfan's page lists 4.7 in and also 4.2 in; confirm before ordering | 6×4.7×2 | Fixed · PC | Request this size |
| 7040 Flash | 7×4×3 | Fixed · PC | |
| 7042 Flash (2-blade) | 7×4.2×2 | Fixed · PC |
| Gemfan model | Size (D × P × Blades) | Configuration | Anvil equivalent |
|---|---|---|---|
| BASH3.5 3525 Hurricane (M3) | 3.5×2.5×3 | Fixed · PC | Request this size |
| Hurricane 4937 | 4.9×3.4×3 | Fixed · PC | Request this size |
| Hurricane 51377 MAX | 5.1×3×3 | Fixed · PC | Request this size |
| Hurricane 51466 V2 131.8 mm on Gemfan's page | 5.1×3.6×3 | Fixed · PC | |
| 6038 Hurricane (4-blade) | 6×3.8×4 | Fixed · PC | Request this size |
| 6045 Hurricane | 6×4.5×3 | Fixed · PC | |
| 7035 Hurricane (PC reinforced) | 7×3.5×3 | Fixed · PC reinforced | Request this size |
| 7043 Hurricane | 7×4.3×3 | Fixed · PC | Request this size |
| Gemfan model | Size (D × P × Blades) | Configuration | Anvil equivalent |
|---|---|---|---|
| 7037 Cinelifter | 7×3.7×3 | Fixed · PC reinforced / GF nylon / carbon nylon | Request this size |
| 8046 Cinelifter | 8×4.6×3 | Fixed · GF nylon | Request this size |
| 8060 Cinelifter | 8×6×3 | Fixed · GF nylon | Request this size |
| 9045 Cinelifter | 9×4.5×3 | Fixed · GF nylon | Request this size |
| 9150 Cinelifter 231.14 mm on Gemfan's page | 9.1×5×3 | Fixed · GF nylon | Request this size |
| 1050 Cinelifter | 10×5×3 | Fixed · GF nylon | |
| 1050W Cinelifter (wide blade) | 10×5×3 | Fixed · GF nylon | |
| 1070 Cinelifter | 10×7×3 | Fixed · GF nylon | Request this size |
| 1080 Cinelifter | 10×8×3 | Fixed · GF nylon | Request this size |
| 10.1×5.5 Cinelifter | 10.1×5.5×3 | Fixed · GF nylon | Request this size |
| 1170-3 Cinelifter | 11×7×3 | Fixed · GF nylon | Request this size |
| Gemfan model | Size (D × P × Blades) | Configuration | Anvil equivalent |
|---|---|---|---|
| 493D 3D | 4.9×3.2×3 | Fixed · PC | Request this size |
| SBANG 4934 | 4.9×3.4×3 | Fixed · PC | Request this size |
| Sbang² 4935 | 4.9×3.5×3 | Fixed · PC | Request this size |
| 5127.9 Thomas | 5.1×2.79×3 | Fixed · PC | Request this size |
| MCK 51366 ReV3 | 5.1×2.8×3 | Fixed · PC | Request this size |
| 5129 YUKI | 5.1×2.9×3 | Fixed · PC | Request this size |
| 5129.2 MinJae | 5.1×2.92×3 | Fixed · PC | Request this size |
| Freestyle3S | 5.1×3×3 | Fixed · PC | Request this size |
| Freestyle4S | 5.1×3.6×3 | Fixed · PC | |
| 5155 | 5.1×5.5×3 | Fixed · PC | Request this size |
| LR 6026 (2-blade) pitch stated on Gemfan's page as inferred from the model number | 6×2.6×2 | Fixed · PC | Request this size |
| Freestyle 6030 pitch stated on Gemfan's page as inferred from the model number | 6×3×3 | Fixed · PC | Request this size |
| 6033 | 6×3.3×3 | Fixed · PC | Request this size |
| LR 7035 (2-blade, M5) | 7×3.5×2 | Fixed · PC | Request this size |
| 7041 | 7×4.1×3 | Fixed · PC | Request this size |
| 8145 205.74 mm on Gemfan's page | 8.1×4.5×3 | Fixed · PC | Request this size |
| Gemfan model | Size (D × P × Blades) | Configuration | Anvil equivalent |
|---|---|---|---|
| D3 Ducted (1.5 mm) | 3×3×3 | Ducted · PC | Request this size |
| D3.5 Ducted (1.5 mm) | 3.5×3×3 | Ducted · PC | |
| D90S Ducted (3-blade) 90 mm on Gemfan's page | 3.5×3×3 | Ducted · PC | |
| D90 Ducted (5-blade) 90 mm on Gemfan's page | 3.54×2.4×5 | Ducted · PC | Request this size |
| Gemfan model | Size (D × P × Blades) | Configuration | Anvil equivalent |
|---|---|---|---|
| 7036F Folding (2-blade) | 7×3.6×2 | Folding · GF nylon | Request this size |
| 7036F Folding (3-blade) | 7×3.6×3 | Folding · GF nylon | Request this size |
| 8041F Folding (2-blade) | 8×4.1×2 | Folding · GF nylon | Request this size |
| F8041-2 Folding | 8×4.1×2 | Folding · GF nylon | Request this size |
| 8041F Folding (3-blade) | 8×4.1×3 | Folding · GF nylon | Request this size |
| 9046F Folding (2-blade) | 9×4.6×2 | Folding · GF nylon | Request this size |
| 9046F Folding (3-blade) | 9×4.6×3 | Folding · GF nylon | Request this size |
| 1051F Folding (2-blade) | 10×5.1×2 | Folding · GF nylon | |
| 1051F Folding (3-blade) | 10×5.1×3 | Folding · GF nylon | |
| 1159F Folding | 11×5.9×3 | Folding · GF nylon | Request this size |
| 1265F Folding | 12×6.5×3 | Folding · GF nylon | Request this size |
| 1307F Folding | 13×7×3 | Folding · GF nylon | Request this size |
| Gemfan model | Size (D × P × Blades) | Configuration | Anvil equivalent |
|---|---|---|---|
| 8040-3 High-altitude | 8×4×3 | Fixed · PC | |
| 9046 | 9×4.6×3 | Fixed · GF nylon | Request this size |
| 1045 | 10×4.5×3 | Fixed · GF nylon | Request this size |
| 1145 | 11×4.5×3 | Fixed · GF nylon | Request this size |
| 1270-3 6 mm shaft hole with adapter ring | 12×7×3 | Fixed · GF nylon | Request this size |
| 1308-3 | 13×—×3 | Fixed · GF nylon | Request this size |
| 1309-3 | 13×9×3 | Fixed · GF nylon | Request this size |
| 1310-3 | 13×10×3 | Fixed · GF nylon | Request this size |
| 1312 | 13×12×3 | Fixed · GF nylon | Request this size |
| Gemfan model | Size (D × P × Blades) | Configuration | Anvil equivalent |
|---|---|---|---|
| 75mm-2 (2-blade) 75 mm on Gemfan's page | 2.95×0.9×2 | Fixed · PC | Request this size |
| F3015 Floppy Proppy (2-blade) | 3×1.5×2 | Fixed · PC | Request this size |
| DYH3026 | 3×2.6×3 | Fixed · PC | Request this size |
| 3029 Drone Soccer | 3×2.9×3 | Fixed · PC | Request this size |
| 4032 WinDancer | 4×—×3 | Fixed · PC | Request this size |
| F4019 Floppy Proppy (2-blade) | 4×1.9×2 | Fixed · PC | Request this size |
| F4019 Floppy Proppy (3-blade) | 4×1.9×3 | Fixed · PC | Request this size |
| 4022F (for DJI Flip) | 4×2.2×— | Fixed · PC | Request this size |
The line carries these references from earlier Gemfan listings. They still resolve to the Anvil part, but the model is not on gemfanhobby.com today, so the note says what changed.
| Gemfan model | Anvil part | Note |
|---|---|---|
| Gemfan 5040 3-blade | ANV-P5040 | No longer on Gemfan's current 5-inch listing; carried as a legacy reference on retailer consensus. |
| Gemfan Fury 5131.0 | ANV-P5131 | Not on Gemfan's current 5-inch listing. |
| Gemfan Hurricane 51466 MCK V2 | ANV-P5136 | Gemfan's current MCK model is the 51366 ReV3 at 2.8-inch pitch, which is not a 3.6-inch part. |
| Gemfan D90-3 | ANV-D3530 | Gemfan's current D90 is a 5-blade at 2.4-inch pitch; the 3-blade is now listed as the D90S. |
Sizes were read from gemfanhobby.com product pages on 3 September 2026. Where a page gives a millimetre diameter it is converted to inches and the millimetre figure noted; where a page states no pitch or blade count the field shows a dash. Nothing here is decoded from a model number. Gemfan and its model names are trademarks of their owner, used to identify the parts a buyer is replacing; Anvil Propulsion is not affiliated with or endorsed by Gemfan Hobby Co., Ltd., Ningbo, Zhejiang, China.
Gemfan propellers are made in China. For US programs subject to NDAA covered-country flow-down requirements — which reach individual components, propellers included — that typically rules foreign-made parts like these out. Whether a specific part is permitted on a specific program depends on your contract's flow-downs, so confirm with your compliance team.
A drop-in is an Anvil part referenced to that model on the manufacturer's published diameter, pitch, blade count and hub, so a platform keeps its tune when the supplier changes. A same-nominal-size match shares diameter, pitch, blade count and configuration but has not been referenced to the model, so fitment, including the hub interface, has to be confirmed before it is ordered.
Send the part number with your quantity, requirement and timeline. Sizes outside the standard line are handled as custom programs, and we'll tell you straight whether it is one we can build.
Send the part number on your BOM with your quantity, NDAA requirement, and timeline. Anvil Propulsion will come back with availability and a quote.
Request a Quote