All Propellers
ANV-P5131Quoted on request

5.1×3.1×3 NDAA-Compliant Tri-Blade Propeller

5-inch·Fixed·Polycarbonate·3-blade·CW / CCW

Domestic NDAA-compliant 5-inch tri-blade — drop-in for the Gemfan Fury 5131.0. Made in Nevada, USA.

Get pricing and lead timeRequest specsNot the size you need? See the full cross-reference →

No performance numbers are published until backed by real test data.

Specifications — drop-in fitment for Gemfan Fury 5131.0

Part Number
ANV-P5131
Size (D × P × Blades)
5.1×3.1×3
Diameter
129 mm (5.1 in)
Pitch
3.1 in
Hub
5 mm shaft hole
Hub Thickness
6.7 mm
Max Blade Width
15 mm
Reference Mass
4.2 g
referenced part
Blades
3
Configuration
Fixed
Rotation
CW & CCW available (ordered as -CW / -CCW)
Material
Polycarbonate
Application
High-KV racing and attritable platforms (2306 / 2207 motors, 500–600 g class)
Country of Origin
United States
Unit of Issue
Ordered by rotation — -CW and -CCW are separate part numbers
Quantity and set composition confirmed at quote
CAGE Code
23SC7
Availability
Quoted on request
Lead time quoted per program

Dimensions and fitment data are the referenced propeller's own published specification, not Anvil measurements.

Replaces Gemfan Fury 5131.0

If your bill of materials calls out Gemfan Fury 5131.0 — or an equivalent Gemfan Fury-class 5-inch tri-blade — the Anvil Propulsion 5.1×3.1×3 is the domestic, NDAA-compliant replacement. Send us the foreign part number on your BOM and we'll confirm fitment.

Anvil Part NumberSizeDrop-In ForClass
ANV-P51315.1×3.1×3Gemfan Fury 5131.0Gemfan Fury-class

Why replace it at all? Foreign-made propellers face tightening NDAA covered-country flow-downs and FCC restrictions. See our plain-language compliance guide and why the sourcing gap exists now.

Other Sizes

5×4.3×3
Drop-in for HQProp 5X4.3X3 V1S
5.1×3.6×3
Drop-in for Gemfan Hurricane 51466
5.1×4.6×3
A 5.1-inch tri-blade in polycarbonate at 4.6-inch pitch, for tactical FPV and high-performance 5-inch platforms.
5.1×4.7×3
A 5.1-inch tri-blade in polycarbonate, for freestyle and mid-range FPV platforms.
7×4×3
Drop-in for Gemfan Flash 7040
8×4×3
Drop-in for Gemfan 8040-3
10×5×3
Drop-in for Gemfan 1050 Cinelifter
12×6×3
A 12-inch tri-blade in glass-fiber-reinforced PA66, for heavy-lift and Group 2 multirotor platforms.
3×3×3
Drop-in for HQProp T3X2.9X3
3×2.5×3
A 3-inch tri-blade built to a customer-specified 2.5-inch pitch, for training and endurance-tuned micro platforms.
3.5×3×3
Drop-in for Gemfan D90-3 / D90S-3 3.5″
6×4×3
A 6-inch tri-blade in glass-fiber-reinforced PA66, for small multirotor lift and transitional FPV and long-range platforms.
6×4.5×3
Drop-in for Gemfan Hurricane 6045-3
7×4.2×2
Drop-in for Gemfan Flash 7042
10×5.1×2
Drop-in for Gemfan 1051F-2
10×5.1×3
Drop-in for Gemfan 1051F-3
6×4×2
Tube-launched, packable, and collapse-for-deployment airframes

Need the 5.1×3.1×3 in volume?

Send your quantity, NDAA requirement, and timeline. We'll come back with availability and a quote.

Request a Quote