All Propellers
ANV-P3030Quoted on request

3×3×3 NDAA-Compliant Tri-Blade Propeller

3-inch·Fixed·Polycarbonate·3-blade·CW / CCW

Domestic NDAA-compliant 3-inch propeller — T-mount tri-blade for training and sub-250g class platforms. Made in Nevada, USA.

Get pricing and lead timeRequest specsNot the size you need? See the full cross-reference →

No performance numbers are published until backed by real test data.

Specifications — target design specs

Part Number
ANV-P3030
Size (D × P × Blades)
3×3×3
Diameter
3.0 in (76 mm)
target
Pitch
3.0 in
target
Hub
T-mount — 1.5 mm shaft, 5 mm mounting hole spacing
target
Blades
3
Configuration
Fixed
Rotation
CW & CCW available (ordered as -CW / -CCW)
Material
Polycarbonate
target
Application
Training, sub-250g, and toothpick platforms
Country of Origin
United States
Unit of Issue
Ordered by rotation — -CW and -CCW are separate part numbers
Quantity and set composition confirmed at quote
CAGE Code
23SC7
Availability
Quoted on request
Lead time quoted per program

All specifications for this SKU are target design specs — not measured data.

Replaces HQProp T3X2.9X3

If your bill of materials calls out HQProp T3X2.9X3 — or an equivalent HQProp / Gemfan-equivalent 3-inch tri-blade — the Anvil Propulsion 3×3×3 is the domestic, NDAA-compliant replacement. Send us the foreign part number on your BOM and we'll confirm fitment.

Anvil Part NumberSizeDrop-In ForClass
ANV-P30303×3×3HQProp T3X2.9X3HQProp / Gemfan-equivalent

Why replace it at all? Foreign-made propellers face tightening NDAA covered-country flow-downs and FCC restrictions. See our plain-language compliance guide and why the sourcing gap exists now.

Other Sizes

5×4.3×3
Drop-in for HQProp 5X4.3X3 V1S
5.1×3.6×3
Drop-in for Gemfan Hurricane 51466
5.1×4.6×3
A 5.1-inch tri-blade in polycarbonate at 4.6-inch pitch, for tactical FPV and high-performance 5-inch platforms.
5.1×4.7×3
A 5.1-inch tri-blade in polycarbonate, for freestyle and mid-range FPV platforms.
7×4×3
Drop-in for Gemfan Flash 7040
8×4×3
Drop-in for Gemfan 8040-3
10×5×3
Drop-in for Gemfan 1050 Cinelifter
12×6×3
A 12-inch tri-blade in glass-fiber-reinforced PA66, for heavy-lift and Group 2 multirotor platforms.
3×2.5×3
A 3-inch tri-blade built to a customer-specified 2.5-inch pitch, for training and endurance-tuned micro platforms.
3.5×3×3
Drop-in for Gemfan D90-3 / D90S-3 3.5″
5.1×3.1×3
Drop-in for Gemfan Fury 5131.0
6×4×3
A 6-inch tri-blade in glass-fiber-reinforced PA66, for small multirotor lift and transitional FPV and long-range platforms.
6×4.5×3
Drop-in for Gemfan Hurricane 6045-3
7×4.2×2
Drop-in for Gemfan Flash 7042
10×5.1×2
Drop-in for Gemfan 1051F-2
10×5.1×3
Drop-in for Gemfan 1051F-3
6×4×2
Tube-launched, packable, and collapse-for-deployment airframes

Need the 3×3×3 in volume?

Send your quantity, NDAA requirement, and timeline. We'll come back with availability and a quote.

Request a Quote